{"product_id":"baader-astrosolar-clearwhite-safety-film","title":"Baader AstroSolar ClearWhite Safety Film OD 5.1","description":"\u003cul\u003e\n\u003cli\u003eAstroSolar® ClearWhite Safety Film OD 5.1 – Solar filter film for direct solar observation and high-quality front-mounted filters\u003c\/li\u003e\n\u003cli\u003eOptical density OD 5.1; light reduction of more than 99.999% or approximately a factor of 1:125,000\u003c\/li\u003e\n\u003cli\u003eFor direct solar observation with the naked eye in a suitable holder, as well as for constructing front-mounted objective filters for telescopes, binoculars, spotting scopes, and camera lenses\u003c\/li\u003e\n\u003cli\u003eProduces a clear white solar image with high sharpness and contrast, even at the highest magnifications\u003c\/li\u003e\n\u003cli\u003eMeets the applicable transmittance requirements of EN ISO 12312-2:2015 for filters intended for direct observation of the sun\u003c\/li\u003e\n\u003cli\u003eSuccessor to the proven AstroSolar® Safety Film OD 5.0 available since 1999 – featuring a clear white solar image and higher optical density\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003ch2\u003eBaader AstroSolar® ClearWhite Safety Film OD 5.1\u003c\/h2\u003e\n\u003cp\u003eThe Baader AstroSolar® ClearWhite Safety Film OD 5.1 is a high-quality, double-sided metallized solar filter film designed for direct solar observation as well as for constructing front-mounted objective filters for telescopes, binoculars, spotting scopes, and camera lenses.\u003c\/p\u003e\n\u003cp\u003eThe film has an optical density of OD 5.1 and reduces the intensity of sunlight by approximately 99.9992%, corresponding to a reduction factor of about 125,000. It complies with the applicable transmittance requirements of EN ISO 12312-2:2015 for filters intended for direct observation of the sun.\u003c\/p\u003e\n\u003cp\u003eCompared to the previous AstroSolar® Safety Film OD 5.0, the new ClearWhite version provides an even clearer, whiter solar image along with a slightly higher optical density. Sunspots, granulation, and fine structures of the photosphere can be seen sharply and richly contrasted when used with suitable optical equipment.\u003c\/p\u003e\n\u003ch2\u003eClear white solar image with high optical quality\u003c\/h2\u003e\n\u003cp\u003eAstroSolar® ClearWhite Safety Film OD 5.1 was developed to provide a particularly neutral, clear white solar image. Undesirable bluish or orange color casts, which may occur with simpler solar filters, are largely avoided.\u003c\/p\u003e\n\u003cp\u003eThe film is manufactured from a special streak-free and bubble-free substrate and achieves an optical quality comparable to high-quality plane-parallel glass filters despite a thickness of only 0.012 mm. The material is not ordinary “Mylar” and was developed for exceptionally high uniformity and optical purity.\u003c\/p\u003e\n\u003cp\u003eThe double-sided coating ensures especially uniform filter performance and reduces the effect of isolated microscopic irregularities in the metallization. A single layer of AstroSolar® ClearWhite Safety Film OD 5.1 is sufficient to produce a safe solar filter with excellent image sharpness.\u003c\/p\u003e\n\u003ch2\u003eFor direct solar observation and front-mounted objective filters\u003c\/h2\u003e\n\u003cp\u003eAstroSolar® ClearWhite Safety Film OD 5.1 can be used for direct solar observation with the naked eye when handled correctly. This requires that the film is undamaged and used in a suitable, light-tight, and securely mounted holder.\u003c\/p\u003e\n\u003cp\u003eFor telescopes, binoculars, spotting scopes, and camera lenses, the film must only be used as a front-mounted objective filter. The filter must be positioned in front of the optical entrance aperture, securely cover the entire opening, and be protected against slipping, loosening, or being lifted by wind.\u003c\/p\u003e\n\u003ch2\u003eVisual and Photographic Use\u003c\/h2\u003e\n\u003cp\u003eThe AstroSolar® ClearWhite Safety Film OD 5.1 is equally suitable for photography and visual observation. With the focal ratios of typical telescopes and camera lenses, exposure times are short enough to capture sharp images of the sun in single exposures or to perform lucky imaging. This is perfect for observing and photographing the sun under normal conditions as well as during the partial phases of solar eclipses.\u003c\/p\u003e\n\u003cp\u003eYou also do not need to worry when looking through a camera viewfinder, as this can be done safely when the filter is correctly installed in front of the optical system.\u003c\/p\u003e\n\u003cp\u003eNever use solar filters at the eyepiece, behind the objective lens, at the focal point, or anywhere other than the front end of the optical system. Furthermore, never look through a telescope, binoculars, spotting scope, or camera while wearing eclipse glasses or using a handheld solar film filter.\u003c\/p\u003e\n\u003ch2\u003eConstruction of custom solar filters\u003c\/h2\u003e\n\u003cp\u003eHigh-quality solar filters for telescopes, binoculars, spotting scopes, and camera lenses can be made from AstroSolar® ClearWhite Safety Film OD 5.1 in just a few simple steps.\u003c\/p\u003e\n\u003cp\u003eDetailed assembly instructions and safety information are included with every sheet of film. They are also available for download on this website. Stress-free mounting is essential: the film must not be stretched tight or pulled under tension. It should be mounted wrinkle-free, but without mechanical stress, in order to preserve its high optical quality. The film may sit slightly wavy or somewhat loose in the holder without negatively affecting optical performance.\u003c\/p\u003e\n\u003cp\u003eInspect both the film and the holder before each use. Do not use the film if it shows tears, holes, creases, major scratches, delamination, loose areas, or extensive wipe or abrasion marks. Damaged film must not be repaired and must be replaced immediately.\u003c\/p\u003e\n\u003ch6\u003eSafety instructions for solar observation\u003c\/h6\u003e\n\u003cp\u003eNever look directly at the sun without a suitable and undamaged solar filter. Ordinary sunglasses, emergency blankets, CDs, photographic neutral density filters, or other untested materials are not suitable for visual solar observation, as they may transmit dangerous portions of invisible radiation that are not directly visible but can still cause permanent eye damage.\u003c\/p\u003e\n\u003cp\u003eA safe solar filter is also required during a partial or annular solar eclipse. Only during the brief phase of complete totality in a total solar eclipse — when the sun’s photosphere is entirely covered by the moon — may the solar corona be observed without a filter. As soon as any part of the solar disk becomes visible again, an appropriate solar filter must be used at all times.\u003c\/p\u003e\n\u003cp\u003eChildren may only use solar filters under adult supervision. Never leave solar filters, eclipse glasses, handheld viewers, solar telescopes, binoculars, or cameras unattended.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"data-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm\u003c\/th\u003e\n\u003ctd\u003eAstroSolar® ClearWhite Safety Film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptical density\u003c\/th\u003e\n\u003ctd\u003eOD 5.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable sheet sizes\u003c\/th\u003e\n\u003ctd\u003e100 × 50 cm; 117 × 117 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eVisual white-light solar observation and imaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eDIY front-aperture filter holder required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch6\u003eDownloads\u003c\/h6\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0267\/1172\/0013\/files\/how-to-build-your-own-astrosolar-filter.pdf?v=1794426652\"\u003eHow to build your own AstroSolar filter\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0267\/1172\/0013\/files\/safety-and-application-instructions-on-astrosolar-clearwhite-safety-film-od-5-1.pdf?v=1794426652\"\u003eSafety- and Application Instructions on AstroSolar ClearWhite Safety Film OD 5.1\u003c\/a\u003e\u003c\/p\u003e","brand":"Baader Planetarium","offers":[{"title":"100 × 50 cm","offer_id":68181025620204,"sku":"ASOLV-MCW","price":139.0,"currency_code":"USD","in_stock":true},{"title":"117 × 117 cm","offer_id":68181025652972,"sku":"ASOLV-LCW","price":492.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0267\/1172\/0013\/files\/astrosolar-clearwhite_wide.jpg?v=1794415221","url":"https:\/\/alpineastro.com\/products\/baader-astrosolar-clearwhite-safety-film","provider":"Alpine Astronomical LLC","version":"1.0","type":"link"}