10Micron Accessories

Description This package includes the most important accessories to get your 10Micron GM1000 HPS Mount ready to use, offering the best level of per...

Description This package includes the most important accessories to get your 10Micron GM2000 HPS II Ultraport / Combi Mount ready to use, offering ...

Description This special option for the AZ2000 HPS Mount (#10M2000AZ) allows the use of two (or more) optics side by side. Secondary telescope payl...

Description This special option for the AZ4000 Mount (#10M4000AZ) allows to use two (or more) optics side by side. Secondary telescope payload capa...

Description Modification package for ext. temperature range to -35°C Not available for retrofitting existing mounts ColdTemp package for GM2000, GM...

Description Modification package for ext. temperature range to -35°C Not available for retrofitting existing mounts ColdTemp package for GM2000, GM...

Description Designed specifically for the GM1000 HPS Mount and the Leonardo Binomount, the Aries Tripod is the world´s most rigid and most lightwei...

Description Take care of your GM1000 with these high-performance hard-shell cases. These made in Italy cases use a special resin compound that offe...

Description Set of three special PLB resin cases, specific for GM2000HPS II Ultraportable mounts. Take care of your GM2000 with these high-performa...

Description Robust, waterproof transportation bag from Cordura-Cloth with two handles. The transportation bag has two compartments: The large compa...

Description GPS receiver module with specific connector for all the 10Micron mounts: GM1000, GM2000, GM3000 and GM4000 This GPS receiver module all...

Description To equip any old mount with firmware 2.x and higher.  Included with all 10Micron HPS-mounts Stand alone control unit – no PC required ...

Description The expert net control 2104 switching module is perfect for observatory installations, providing remote switching (power on/off) of all...

Description Two lightweight reinforced Cordura bags for GM1000 Mount and accessories for safe transport These Cordura, light bags are designed to ...

Description Special dovetail adapter plate to mount the "Lodual" #10M2105 on the GM1000. Includes a #10M2085. This kit ensures correct orientation...

Description Portable “switching” power supply, Input 110-240 V AC, output 24V (for GM1000) This high-quality Switching Power Supply accepts 110 to ...

Description Mobile Power Supply (DC converter) 12V input, 24V output (for GM1000 & GM2000) This Power Supply is a very high quality and reliabl...

Description Stainless Steel 6.6 lb (3kg) counterweight for 10Micron GM1000 HPS and LEONARDO Mount For shaft diameter of 30 mm Precision Bore for s...

Description Stainless Steel 13.2 lb (6kg) counterweight for 10Micron GM1000 HPS and LEONARDO Mount For shaft diameter of 30 mm Precision Bore for ...

Description Stainless Steel 13.2 lb (6kg) counterweight for 10Micron GM2000 mounts.   Diameter 185 x 30 mm, for shaft diameter of 40 mm Precision ...

Description Stainless Steel 26.4 lb (12kg) counterweight for 10Micron GM2000 mounts.   Diameter 185 x 60 mm, for shaft diameter of 40 mm Precision...

Description Stainless Steel 44 lb (20kg) counterweight for 10Micron GM3000 mounts.   Diameter 225 x 70 mm, for shaft diameter of 50 mm Precision B...

Description Stainless Steel 44 lb (20kg) counterweight for 10Micron GM4000 mounts.   Diameter 225 x 70 mm, for shaft diameter of 60 mm Precision B...

Description Electroplated steel pier flange, designed to adapt the GM2000 mount onto steel piers or custom tripods.

Description Black anodized aluminium, includes all the necessary knobs, screws, and azimuth pin. For adapting the GM2000 onto Tripods and pillars f...

Description Electroplated steel Pier Adapter flange, designed to accommodate the GM3000 mount on top of the Baader Steel Leveling Flange or for mou...

Description This kit is consists of a shipping wooden pallet-box and a Pier Adapter (#10M3090).  Mandatory for the GM3000. Both are necessary items...

Description Electroplated steel Pier Adapter flange, designed to accommodate the GM4000 mount on top of the Baader Steel Leveling Flange or for mou...

Description This kit is consists of a shipping wooden pallet-box and a Pier Adapter (#10M4090).  Mandatory for the GM4000. Both are necessary items...

Description Dovetail plate for Losmandy D style dovetail bars (3").   Fits directly onto GM2000 mounts. CNC machined, black anodized aluminum Two ...

Description The Losmandy compatible dovetail clamping plate 3? XL gives a  very high level of stability and safety, especially for heavier and long...

Description The “Maxi”-dovetail clamping plate is designed to accept 4” 10Micron dovetail bars, and is especially suitable for heavier configuratio...

Description This special double plate is designed to allow parallel mounting of two optical tubes onto 10Micron mounts.  Material: Black anodized,...

Description This special double plate is designed to allow parallel mounting of two optical tubes on 10Micron mounts. The bottom slide is a standar...

Description Losmandy Style 3" Dovetail Bar, 300mm.  By 10Micron Material: Black anodize, CNC machined aluminum Losmandy style dovetail (3”) Length...

Description Losmandy Style 3" Dovetail Bar, 400mm.  By 10Micron Material: Black anodize, CNC machined aluminum Losmandy style dovetail (3”) Length...