Mount Accessories

Description 1kg Leveling Weight made of V2A stainless steel Axis diameter 16mm Diameter 75 mm x 30 mm Suitable for Baader Shafts for leveling cou...

Description Mounting Block for counterweight-bar M14, Ø 16mm for use on CDKs von Planewave Instruments Counterweight bar ( Shafts for leveling co...

Description Leveling-Weight Set developed for PlaneWave Direct-Drive mounts: for perfect balance in both axis Mounts directly to the standard scr...

Description 10/17 - Revised Version: with significantly more mounting options than the predecessor plate, which could only hold our guidescope ri...

Description Baader PAN-EQ clamp V370 dual clamp The PAN 3"/ EQ 370 offers a secure and absolutely firm clamping - for all standard mounting rails ...

Description Quick mounting of optics with all EQ standard Celestron / Skywatcher / Vixen dovetail Massive but lightweight EQ-clamp, 190 mm (7.5") ...

Description Clamps all 3" (Losmandy) and EQ- (Vixen/Celestron/Skywatcher) dovetails - minimum dovetail length 190mm It is equipped with all the kn...

Description Counterweight Accessories for OTAs 125382 COUNTERWEIGHT, 0.5 LBS STAINLESS STEEL, FOR 3/8-16 FEMALE-THREAD, 1.8" OD (COMPATIBLE WIT...

Description Needed to connect the Pan Adjuster for adjusting the optical axis of parallel mounted telescopes (#2451515) to the L-350 mount from Pl...

Description Compact, mobile rotary stage for adjustment of 3" or 8" PAN EQ clamps on double mounting plates or mounts of the L-Mount series. Makes...

Description The 600182 Keller EZ Saddle accepts Losmandy D style dovetail rails such as the CDK12.5 and CDK14. This saddle comes standard with the ...

Description Tandem Bar for Planewave A200 Equatorial Mount. 600356 A200 TANDEM BAR, PARAMOUNT ME INSTRUMENT PANEL PLATE 600357 A200, TANDEM BA...

ASCEND BALANCING ACCESSORY (COMPATIBLE WITH 600379/600380 SHAFTS & 600377/600378 WEIGHTS) Description Now one person can easily balance a CDK o...

Description Add to the versatility of you L500/600 direct drive mount with PlaneWave's L500/L600 Equatorial Wedge for precise polar alignment and t...

PORTABLE ROLLING PIER FOR L-SERIES MOUNT (SPECIFY MOUNT MODEL TO BE USED) Description With the Portable Rolling Pier, you can now use your L-Series...

Description Add to the versatility of your L350 direct drive mount with PlaneWave's L350 equatorial Wedge for precise polar alignment and tracking ...

Description The CENTAURUS II tripod was designed specifically to support the HPS-encoder technology used in the portable 10Micron GM2000 mounts. Th...

Description The Baader Modal Steel Pillar is a fully engineered permanent observatory solution for the small to medium 10Micron mounts (GM1000, GM2...

Description The Baader ColdTemp Network Cable is specifically made for observatory installations.  The special sheath of these cables remains elast...

Description The Baader Modal Steel Pillar is a fully engineered permanent observatory solution for the large 10Micron mounts (GM3000, GM4000).  Its...

Description Baader Double Mounting Plate.  8" width (203mm) heavy-duty dovetail bar 570mm in total length, for up to 100kg (220lbs).  Mounts onto h...

Description Balancing, 400mm long baseplate, fits onto #2451558 Baader-Sidewings. Allows the adaptation of Baader Guidescope rings (size I, II, and...

Description The Baader ColdTemp Network Cable is specifically made for observatory installations.  The special sheath of these cables remains elast...

Description Special dovetail adapter plate to mount the "Lodual" #10M2105 on the GM1000. Includes a #10M2085. This kit ensures correct orientation...

Description This special double plate is designed to allow parallel mounting of two optical tubes onto 10Micron mounts.  Material: Black anodized,...

Description The “Maxi”-dovetail clamping plate is designed to accept 4” 10Micron dovetail bars, and is especially suitable for heavier configuratio...

Description This special double plate is designed to allow parallel mounting of two optical tubes onto 10Micron mounts.  Material: Black anodized,...

Description This special double plate is designed to allow parallel mounting of two optical tubes on 10Micron mounts. The bottom slide is a standar...

Description Dovetail plate for Losmandy D style dovetail bars (3").   Fits directly onto GM2000 mounts. CNC machined, black anodized aluminum Two ...

Description Electroplated steel Pier Adapter flange, designed to accommodate the GM3000 mount on top of the Baader Steel Leveling Flange or for mou...

Description Electroplated steel Pier Adapter flange, designed to accommodate the GM4000 mount on top of the Baader Steel Leveling Flange or for mou...

Description Black anodized aluminium, includes all the necessary knobs, screws, and azimuth pin. For adapting the GM2000 onto Tripods and pillars f...

Description Set of three special PLB resin cases, specific for GM2000HPS II Ultraportable mounts. Take care of your GM2000 with these high-performa...

Description The expert net control 2104 switching module is perfect for observatory installations, providing remote switching (power on/off) of all...

Description This high-quality Switching Power Supply accepts 110 to 240V AC input.  The stabilized output ensures the proper 24V, 5A (120W) power t...

Description The Losmandy compatible dovetail clamping plate 3? XL gives a  very high level of stability and safety, especially for heavier and long...