Planewave Telescope Accessories

Description This 0.25″ thick tip-tilt adapter is designed for securing to the Series-5 focuser and rotator. The adapter presents the SecureFit bol...

The Series -5XL focuser has a clear aperture of 6.25″ and is only 1.675″ thick. The focuser is capable of lifting 40 lbs (18 kg) with a travel rang...

Description 1kg Leveling Weight made of V2A stainless steel Axis diameter 16mm Diameter 75 mm x 30 mm Suitable for Baader Shafts for leveling cou...

Description Mounting Block for counterweight-bar M14, Ø 16mm for use on CDKs von Planewave Instruments Counterweight bar ( Shafts for leveling co...

Description Leveling-Weight Set developed for PlaneWave Direct-Drive mounts: for perfect balance in both axis Mounts directly to the standard scr...

Description The PW1000 reducer takes the native f/6 system down to f/4.25. With the reducer installed users have 6.516″ of remaining available bac...

SERIES-5 CONTROLLER - ELECTRONIC FOCUSER, ROTATOR, AND FAN CONTROL FOR DELTARHO-350, SERIES-5 FOCUSER, AND SERIES-5 ROTATOR.  Description The Seri...

ADAPTER, M68 X 1.0 THREAD TO SECURFIT L=0.25" Description This adapter presents M68 x 1 male threads on the camera side and presents SecureFit on ...

ADAPTER, M54 X 0.75 THREAD TO SECURFIT L=0.25" Description This adapter presents M54 x 0.75 male threads on the camera side and presents SecureFit...

ADAPTER, M48 X 0.75 THREAD TO SECURFIT L=0.25" Description This adapter presents M48 x 0.75 male threads on the camera side and presents SecureFit...

ADAPTER, SECUREFIT TO MONSTER-MOAG OR SAGITTA L=0.55" Description SecureFit to Monster-MOAG, or Optec Sagitta OAG, adapter. This adapter takes up ...

Description The SecureFit spacers are attached via four screws to the PlaneWave CDK12.5 Hedrick focuser. There are three lengths available  4.8″, ...

Description This is lens group is designed to convert a CDK20 f/6.8 to f/7.77. The original lens group is unscrewed from the backplate of the optic...

Description REDUCER, LENS .66x FOR USE WITH IRF90 & CDK20/24

BAADER 10X60 VARIOS FINDERSCOPE WITH RINGS AND PW ADAPTER Description The back plate on all of the CDK models has four mounting positions for a fin...

SERIES-5 ROTATOR, 5" ID MOTORIZED ROTATOR, 40LB PAYLOAD CAPACITY. REQUIRES SERIES-5 CONTROLLER. Description The Series-5 rotator is a large capaci...

SERIES-5 FOCUSER, 5" ID MOTORIZED FOCUSER, 40LB PAYLOAD CAPACITY. REQUIRES SERIES-5 CONTROLLER. Description The Series-5 focuser is a large capaci...

Description Counterweight Accessories for OTAs 125382 COUNTERWEIGHT, 0.5 LBS STAINLESS STEEL, FOR 3/8-16 FEMALE-THREAD, 1.8" OD (COMPATIBLE WIT...

Description COUNTERWEIGHT, 2LBS FOR L-350 & L-500/L-600 SLIDING WEIGHT SYSTEMS

L-500/L-600 MOUNT EXTERNAL SLIDING WEIGHT ACCESSORY, "TOE WEIGHT SYSTEM" (INCLUDES 1x EACH 2LB, 5LB, & 10LB WEIGHTS) Description Add to the ve...

L-350 MOUNT EXTERNAL SLIDING WEIGHT ACCESSORY, "TOE WEIGHT SYSTEM" (INCLUDES 1x EACH 2LB & 10LB WEIGHTS) Description Add to the versatility of...

Description Planewave Tip-Tilt Adjustment Accessories. Specifications 6001003 TIP-TILT ADAPTER, FITS OTA BACKPLATE, SERIES-5 FOCUSER OR ROTATOR...

CDK700 SPANDEX SHROUD SPACER, 3D PRINTED, FOR USE WHEN SHROUD AND MIRROR-COVERS ARE BOTH INSTALLED (SINGLE-UNIT, 4X REQUIRED PER OTA) Description ...

Description Protect the primary mirror of your CDK700 from unwanted dust and moisture with the PlaneWave Primary Mirror Shutter.  The four-vane shu...