M48 Adaptor System

Description Adapter M48i to T-2a Reducing Ring M48 to T-2 with M48 female thread Changes the M48 male thread of a telescope into a T-2 male thread...

Description M48 tilter for aligning your camera without tilt Compatible with the entire Baader M48 system 0-1° tilt range to correct misalignments...

Description Nosepiece 2" to M54a, ultra-hard with Safety-Kerfs Focus-sided M54 male thread Telescope-sided 2" barrel with 2" filter thread (M48) I...

Description Reducing Adapter M54 to M48 with M54 male thread Changes the M54 female thread of an adapter into an M48 female thread Can be used to ...

Description Reducing Adapter M54 to M48 with M54 female thread Changes the M54 male thread of an adapter into an M48 male thread Can be used to co...

Description Used to adjust the working distance of larger cameras and similar accessories with M48 thread Telescope side M48 internal thread, 3.5 ...

Description Used to adjust the working distance of larger cameras and similar accessories with M48 thread Telescope side M48 internal thread, 3.5 ...

Description Used to adjust the working distance of larger cameras and similar accessories with M48 thread Telescope side M48 internal thread, 3,5m...

Description Used to adjust the working distance of larger cameras and similar accessories with M48 thread Telescope side M48 internal thread, 3.5 ...

Description Used to adjust the working distance of larger cameras and similar accessories with M48 thread Telescope side M48 internal thread, 3,5 ...

Description Used to adjust the working distance of larger cameras and similar accessories with M48 thread Telescope side M48 internal thread, 3.5 ...

Description Nosepiece with Baader proprietory Safety Kerfs grooves so that even the heaviest accessories cannot fall to the ground Equipped with o...

Description Heavy Duty M48 Quick Changing System enables lightning-fast changes between cameras, filter wheels or ClickLock eyepiece clamps, for e...

Description M48 male thread quick coupler with 50 mm dovetail Creates a quick change and rotating device with standard load capacity when coupled ...

Description M48 female thread Heavy Duty Quick Changer Creates with the Baader M48 Quick Changing Ring (#2958595) a quick-change and rotating devi...

Description Changer / Reducing Ring M48 to T-2 with M48 male thread Changes the M48 female thread of a adapter into a T-2 male thread Can be used ...

Description Converts an M48 (Zeiss) female thread in an M48 male thread Made of hardened, stainless steel This adapter is included in the scope of...

Description Reducing piece: M68 external to M48external for direct connection of M48 accessories to the M68 system Changes the M68 (Zeiss) female ...

Description Baader-FlipMirror II Star Diagonal (BFM II) with three ports: Straight-through (S52, M48 and T-2 on both sides) for full-frame camera...

Description Changer / Inverter Ring M48 to T-2 for T-Rings / Adapters with M48 inner thread Can be used to combine T-Rings with M48 inner threads ...

Description Changer / Inverter Ring S52/M48 for T-Rings / Adapters with S52 dovetail Can be used to combine T-Rings with S52 dovetail with accesso...

Description Converts any 2" (SC) female thread into a M48 x 0.75 female thread- without extending the optical length Initially manufactured to ada...

Description This M48-spacer ring is necessary for connecting the MPCC Mark III coma corrector to the Baader Protective Canon EOS T-Ring or any of ...

Description T-2 / M48 extension converts M48 female into T-2 female thread) Focusser side 48mm / 2" external thread (fits all 2" filters) Telescop...

Description Allows mounting of Baader 2" filters Needs Hyperion DT-rings #2958028- 2458062 and additional Stepper Rings M67 up to M82 All Baader 2...

Description T-2 Photo-Adapter with 2" inner thread Telescope side 2" nose piece barrel with safety groove, focus side T-2 external thread. Effecti...

Description Converts 2" female into 2" male thread Internal M48 Filter thread for 2" filter Can be used to connect Baader Hyperion Mark III Zoom d...