Focusers

Description 2" BDS-SC Baader Diamond Steeltrack® Focuser Baader Planetarium's 2" SC Diamond Steeltrack Focuser gives Schmidt-Cassegrains 30mm of ve...

Description 2" BDS-RT Baader Diamond Steeltrack® Focuser Baader Planetarium's 2" Refractor Diamond Steeltrack Focuser gives refractors a full 3" (7...

Description 2" BDS-NT Baader Diamond Steeltrack® Focuser Upgrade practically any Newtonian, small or large, with all of the smoothness, precision, ...

Description Baader Planetarium's NEW version SteelDrive II Motor Drive gives precision temperature compensated focusing control for all Baader Diam...

Description High-precision focusing motor for heavy loads (up to 8 kg), incl. temperature sensor, supports temperature compensation. Works with ev...

Description Steeldrive II Controller without motor focuser unit Controls the temperature compensating Steeldrive II focusing motor for Baader Stee...

Description Adapter set to connect the Steeldrive II Motor Unit (#2957265) to the FeatherTouch 3.5" focuser from Starlight Instruments Allows moto...

Description Baader Diamond Steeltrack Adapter with M68 female thread to connect M68 accessories according to Zeiss standard Special steel version ...

SERIES-5 FOCUSER, 5" ID MOTORIZED FOCUSER, 40LB PAYLOAD CAPACITY. REQUIRES SERIES-5 CONTROLLER. Description The Series-5 focuser is a large capaci...

Description Adapter to connect the 2" BDS-SC Baader Diamond Steeltrack® Focuser (#2957220) onto M48-threads Only suitable for BDS-SC Diamond Steel...

IRF90, INTEGRATED ROTATING FOCUSER, 40LBS PAYLOAD CAPACITY. REQUIRES THE EFA KIT. Description The IRF90 is a large capacity Integrated Focuser an...

EFA KIT - ELECTRONIC FOCUS, TEMPERATURE AND FAN CONTROL FOR CDK12.5 EFA KIT - ELECTRONIC FOCUS, TEMPERATURE AND FAN CONTROL FOR CDK14, CDK17, CDK20...

Description The Rowe-Ackermann Schmidt Astrograph (RASA) 11 comes with a FeatherTouch MicroFocuser pre-installed which is excellent for providing p...

Description The Focus Motor provides electronic focusing for Celestron Schmidt-Cassegrain (SCT), EdgeHD, and RASA telescope optical tubes. With the...

Description Holder to attach the Steeldrive II Controller to a 3" Dovetail Suitable for all 3" (Losmandy standard) dovetail clamps The controller ...

Description Temperature sensor to compensate the drift automatically, if there are large temperature differences Flat design, ideal to be attached...

Description Temperature sensor with connector and 1Mcable, also supports control of dew shield heating. Can be used with Steeldrivemotor units or ...

Description Metal Magnet Ring for Homing Sensor of Steeldrive II. Fits Baader Diamond Steeltrack Focusers If you have upgraded your Diamong Steelt...

Description Adapter from Steeldrive II Controller Aux port to RCA type connector for common heating strips up to 10W. Enables precise temperature ...

Description To connect to Skywatcher Refractors with M90x1.5 outer threads Only suitable for BDS-RT Diamond Steeltrack® for Refractors Specificat...

Description To connect to Explore Scientific Refractors with 4.2" outer diameter and other telescopes with an inner tube diameter of 116,8mm Only ...

Description To connect to Skywatcher Refractors with M90x1 outer threads Only suitable for BDS-RT Diamond Steeltrack® for Refractors Also fits RC ...

Description To connect to Intes Micro with D66 Flange Only suitable for BDS-RT Diamond Steeltrack® for Refractors Specifications MANUFACTURER ...

Description To connect to Meade instruments with 4" inner threads Only suitable for BDS-SC Diamond Steeltrack® for SCs Specifications MANUFACT...

Description To connect Refractors with 97mm inner diameter Fitting for many Synta and Celestron tubes Only suitable for BDS-RT Diamond Steeltrack®...

Description Enables mounting of the Baader NT Diamond Steeltrack onto Dobsonians with flat mounting surfaces. Dovetailed Attachment to focuser per...

Description To connect onto Vixen Refractors with M88x1 inner threads Only suitable for BDS-RT Diamond Steeltrack® for Refractors Specifications ...

Description BDS-Adapter with M68 outer thread to connect M68 parts Mounted instead of the standard clamp with the S58 dovetail ring Suitable for a...

Description BDS-Adapter with M48 outer thread to connect M48 parts Mounted instead of the standard clamp with the S58 dovetail ring Suitable for a...

Description BDS-Adapter with T-2 outer thread to connect T-2 parts Mounted instead of the standard clamp with the S58 dovetail ring Suitable for a...

Description To connect Refractors with M93x1 inner threads Only suitable for BDS-RT Diamond Steeltrack® for Refractors Specifications MANUFACT...

Description Adapter M82/M68 Reducer ring for Baader 3" Hyperion Focuser Learn more about the Baader M68 Tele-Compendium Specifications MANUFAC...

Description Special Reducer 2" / 1¼" with 4.5mm optical height only Suitable for BDS-NT Diamond Steeltrack Includes 2" Filterholder (M48 inner thr...

Description Ideal for Newton Focuser e.g. Baader Newton Crayford focusers with only 1mm optical path length Provides three separate mounting optio...

The Series -5XL focuser has a clear aperture of 6.25″ and is only 1.675″ thick. The focuser is capable of lifting 40 lbs (18 kg) with a travel rang...