Accessories

Description The Baader SteelDrive II 3D Printed Belt Cover is designed to protect the belt drive of the SteelDrive II motor, enhancing durability f...

Description BDS-Adapter with M54 outer thread to connect M54 parts replaces the standard clamp, is installed with the S58 dovetail ring Suitable f...

Description Available again for a limited time: Carl Zeiss 1¼" Abbe Barlow lens with T-2 thread made in Germany by Carl Zeiss in Jena – with 1¼" /...

Description Nosepiece 2" to M54a, ultra-hard with Safety-Kerfs Focus-sided M54 male thread Telescope-sided 2" barrel with 2" filter thread (M48) I...

Description Changes a M54 male thread to a M54 female thread Width (optical length) = 7 mm Made of hardened, stainless steel Specifications MA...

Description Reducing Adapter M54 to M48 with M54 male thread Changes the M54 female thread of an adapter into an M48 female thread Can be used to ...

Description Reducing Adapter M54 to M48 with M54 female thread Changes the M54 male thread of an adapter into an M48 male thread Can be used to co...

Description Used to adjust the working distance of larger cameras and similar accessories with M54 thread Telescope side M54x0.75 female thread, 3...

Description M54 dustcap with S54a ring dovetail Robust cap made of black anodized metal Dustproof closure for the M54 Quick Change System Specifi...

Description Dustcap with M54 male thread Robust cap made of black anodized metal Dustproof closure for your accessories of the Baader M54 System ...

Description Dustcap with M54 female thread Robust cap made of black anodized metal Dustproof closure for your accessories of the Baader M54 System...

Description Tool for tension-free mounting and dismounting of hard-to-reach 2" Baader filters with milled grip crown. Suitable for all mounted Baa...

Description This 0.25″ thick tip-tilt adapter is designed for securing to the Series-5 focuser and rotator. The adapter presents the SecureFit bol...

The Series -5XL focuser has a clear aperture of 6.25″ and is only 1.675″ thick. The focuser is capable of lifting 40 lbs (18 kg) with a travel rang...

Description Adapter set to connect the Steeldrive II Motor Unit (#2957265) to the FeatherTouch 3.5" focuser from Starlight Instruments Allows moto...

Description 1¼" filter holder, to use smaller filters or other parts (barlow lenses, reducers) with 1¼" filter thread in the path of light Consist...

Description 3,5" Quick Changing ring with dovetail for the Baader 3,5" Quick Changer and Instrument rotator for PlaneWave (#1324000) Suitable for ...

Description Ring for dovetail for the Baader 3,5" Quick Changing Ring (#1324005) to connect, rotate and change large cameras, spectrographs or vis...

Description M48 dustcap with dovetail Robust cap made of black anodized metal Dustproof closure for the Baader Heavy Duty M48 Quick Changing Syste...

Description Dustcap with M48 male (outer) thread Robust cap made of black anodized metal Dustproof closure for your accessories of the M48 system ...

Description Dustcap with M48 female (inner) thread Robust cap made of black anodized metal Dustproof closure for your accessories of the M48 syste...

Description Camera-side adapter to accommodate PlaneWave SecureFit camera adapters for the Instrument Multi Port IMP85 (#2451300) Used instead of ...

Description Telescope adapter for telescopes with IR90 - integrated Rotating Focuser to the Instrument Multi Port IMP85 Designed and manufactured ...

Description 1kg Leveling Weight made of V2A stainless steel Axis diameter 16mm Diameter 75 mm x 30 mm Suitable for Baader Shafts for leveling cou...

Description Mounting Block for counterweight-bar M14, Ø 16mm for use on CDKs von Planewave Instruments Counterweight bar ( Shafts for leveling co...

Description Leveling-Weight Set developed for PlaneWave Direct-Drive mounts: for perfect balance in both axis Mounts directly to the standard scr...

Description Baader Diamond Steeltrack Adapter with M68 female thread to connect M68 accessories according to Zeiss standard Special steel version ...

Description Baader Wide-T-Ring to connect Leica, Sigma, Panasonic-L cameras on the Astro T-2 system All Baader Wide-T-rings have an S52 dovetail i...

Description Set consisting of four pieces 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters Fitting for Baader FCCT I for RASA 8" ...

Description Set consisting of four pieces 3D-printed filter holder for unmounted Ø 31 x 2 mm Baader filters Fitting for Baader FCCT I for RASA 8" ...

Description Set consisting of four pieces 3D-printed filter holder for unmounted 2" (Ø 47.4 mm) Baader filters Fitting for Baader FCCT I for RASA ...

Description 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cam...

Description 3D-printed filter holder for unmounted Ø 31 x 2 mm Baader filters Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cam...

Description 3D-printed filter holder for unmounted 2" (Ø 47.4 mm) Baader filters Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-...

Description Additional optical spacer ring with 0.5mm thickness to achieve a perfect fine focus in case of focus problems Can be used for Baader F...

Description The FCCT can achieve micron tilt adjustment. To see how, read our guide: How to achieve micron tilt adjustment with the Baader FCCT, UF...