Adapters and Imaging Accessories

Description Set consisting of four pieces 3D-printed filter holder for unmounted 2" (ؘ 47.4 mm) Baader filters Fitting for Baader FCCT I for RASA...

Description 3D-printed filter holder for unmounted ؘ 36 x 2 mm Baader filters Fitting for Baader FCCT I for RASA 8"- suitable for Ø77 mm QHY-Came...

Description 3D-printed filter holder for unmounted ؘ 31 x 2 mm Baader filters Fitting for Baader FCCT I for RASA 8"- suitable for Ø77 mm QHY-Came...

Description 3D-printed filter holder for unmounted 2" (ؘ 47.4 mm) Baader filters Fitting for Baader FCCT I for RASA 8"- suitable for Ø77 mm QHY-C...

Description Additional optical spacer ring with 0.5mm thickness to achieve a perfect fine focus in case of focus problems Can be used for Baader F...

Description The FCCT can achieve micron tilt adjustment. To see how, read our guide: How to achieve micron tilt adjustment with the Baader FCCT, UF...

ADAPTER, M68 X 1.0 THREAD TO SECURFIT L=0.25" Description This adapter presents M68 x 1 male threads on the camera side and presents SecureFit on ...

ADAPTER, M54 X 0.75 THREAD TO SECURFIT L=0.25" Description This adapter presents M54 x 0.75 male threads on the camera side and presents SecureFit...

ADAPTER, M48 X 0.75 THREAD TO SECURFIT L=0.25" Description This adapter presents M48 x 0.75 male threads on the camera side and presents SecureFit...

ADAPTER, SECUREFIT TO MONSTER-MOAG OR SAGITTA L=0.55" Description SecureFit to Monster-MOAG, or Optec Sagitta OAG, adapter. This adapter takes up ...

Description The SecureFit spacers are attached via four screws to the PlaneWave CDK12.5 Hedrick focuser. There are three lengths available 4.8", 3...

Description Planewave Tip-Tilt Adjustment Accessories. Specifications 6001003 TIP-TILT ADAPTER, FITS OTA BACKPLATE, SERIES-5 FOCUSER OR ROTATOR...

Description Reducing piece: M68a to M62a for direct connection of M62 accessories (e.g. QHY Color Filter Wheel (CFW 3) (various versions available...

Description Reducing piece: M68a to M54a for direct connection of M54 accessories (e.g. QHY Color Filter Wheel (CFW 3) (various versions available...

Description The FCCT can achieve micron tilt adjustment. To see how, read our guide: How to achieve micron tilt adjustment with the Baader FCCT, UF...

Description System M54- spacer (Fine-Adjustment) rings, available in thickness 0.3mm (black), 0.5mm (red), 1mm (gold) Very thin ring for finetunin...

Description The FCCT can achieve micron tilt adjustment. To see how, read our guide: How to achieve micron tilt adjustment with the Baader FCCT, UF...

Description 37.5 mm Extension for the IR90- Integrated Rotating Focuser from PlaneWave to the telescope to gain more back focus for the Instrument ...

Description Connection camera side to M68x1 female thread on the Port 1 of the Instrument Multi Port IMP85 (#2451300) A variety of adaptations are ...

Description Telescope adapter for telescopes with Starlight Instruments FeatherTouch 3.5" focuser to the Instrument Multi Port IMP85 (#2451300) A v...

Description This adapter is used to povide a M100x1 female thread for Alluna Optics at port 1 of the Instrument Multi Port IMP85 (#2451300) A varie...

Description This adapter is used to mount the Instrument Multi Port IMP85 (#2451300) for Alluna Optics M100a (male thread). A variety of adaptation...

Description This adapter is used to mount the Instrument Multi Port IMP85 (#2451300) to telescopes with IR90 focuser. A variety of adaptations are...

Description This adapter is used to mount the Instrument Multi Port IMP85 (#2451300) to the PlaneWave CDK 14/17/20/24" with 3.5" Hedrick focuser. ...

Description The ability to get multiple benefits from a telescope opens up whole new worlds for remote observatories as well as amateur astronomers...