Adapters and Imaging Accessories

Description These adapters allow  Fingerlakes cameras and filter wheels to attach to either the 3.5″ Hedrick Focuser or a SecureFit CCD spacer.  Th...

Description SecureFit to FLI Centerline CFW Adapter attaches to the ZTA dovetail interface of the CL1-10 Filter Wheel and takes up only .25″ of spa...

Description CCD Adapter,  SBIG STL to PlaneWave SecureFit An adapter that is used in conjunction with Secure Fit CCD Spacer to attach to a PlaneWav...

Description CCD Adapter, Apogee to PlaneWave SecureFit:  An adapter that is used in conjunction with Secure Fit CCD Spacer to attach to a PlaneWave...

Description This adapter mounts in place of a focuser on CDK14/17/20 & 24 models and has the standard AP female threads. Downloads Drawing

Description This adapter attaches to the back of the CDK17 or CDK20 using the same retaining ring that holds the PlaneWave 3.5″ Hedrick Focuser ont...

Description This adapter attaches directly to the CDK12.5 in place of the focuser and has female AP thread for attaching AP accessories. Downloads ...

Description 1/2 inch of back focus. Each sold separately.

Description Adapter, 3.5″ Hedrick Focuser to 2.7″ AP Threads (only for CDK17 and CDK20) This adapter bolts onto the back of the Hedrick 3.5″ Focuse...

Description Adapter, 2.75″ Hedrick Focuser to 2.7″ AP Threads (only for CDK12.5):  This adapter bolts onto the back of the Hedrick 2.75″ Focuser an...

Description This drawtube spacer allows for 2" imaging, or visual accessories to be attached to the telescope. This will directly attach to the CDK...

ADAPTER, SECUREFIT TO T-THREAD MALE L=0.25" Description CCD Adapter, Male T-Thread to PlaneWave SecureFit:  An adapter that is used in conjunction ...

Description This 0.25 or 1/2″ long SecureFit Extender attaches to a SecureFit CCD spacer to add  spacing to an optical path.  The extenders are sta...

Description Used to adjust the working distance of larger cameras and similar accessories with M48 thread Telescope side M48 internal thread, 3.5 ...

Description Used to adjust the working distance of larger cameras and similar accessories with M48 thread Telescope side M48 internal thread, 3.5 ...

Description Used to adjust the working distance of larger cameras and similar accessories with M48 thread Telescope side M48 internal thread, 3,5m...

Description Used to adjust the working distance of larger cameras and similar accessories with M48 thread Telescope side M48 internal thread, 3.5 ...

Description Used to adjust the working distance of larger cameras and similar accessories with M48 thread Telescope side M48 internal thread, 3,5 ...

Description Used to adjust the working distance of larger cameras and similar accessories with M48 thread Telescope side M48 internal thread, 3.5 ...

Description Nosepiece with Baader proprietory Safety Kerfs grooves so that even the heaviest accessories cannot fall to the ground Equipped with o...

Description Nosepiece with 28mm insertion length, with Baader proprietory Safety Kerfs With only 3 mm long T-2 thread for modern CMOS cameras Eyep...

Description Heavy Duty M48 Quick Changing System enables lightning-fast changes between cameras, filter wheels or ClickLock eyepiece clamps, for e...

Description M48 male thread quick coupler with 50 mm dovetail Creates a quick change and rotating device with standard load capacity when coupled ...

Description M48 female thread Heavy Duty Quick Changer Creates with the Baader M48 Quick Changing Ring (#2958595) a quick-change and rotating devi...

Description Baader UFC Fitting / T-2 (f) Thread Adapter telescope-side: mounting plate for UFC-Base camera-side: with T-2 female thread, especiall...

Description Baader UFC S70 Dovetail-Adapter Telescope-sided with mounting plate for UFC-Base (screws included) Camera-sided with S70 dovetail to s...

Description Baader UFC D58 Dovetail-Receptor Adapter Telescope-sided with mounting plate for UFC-Base (screws included) Camera-sided with D58 to m...

Description Baader UFC S70 / M57 (m) Thread-Adapter Telescope-sided M57 outer thread – for adaptation to Borg telescopes with M57x0.75 thread Came...

Description Baader 2" ClickLock M54 x 0,75 external threaded clamp – for all focusers from TS-Optics / Skywatcher with M54 x 0,75 internal thread ...

Description Maxbright II Bino rotation lock/auxillary-ring – for the shortest possible adaptation of the Maxbright® II Bino directly onto all Baad...

Description T-2 (M42x0.75) Locking ring with lever for direct attachment of the MaxBright® II onto all Baader T-2 star diagonals, prisms or mirror...

Description To connect all parts of the Baader M68 System directly on FLI color filter wheels and SBIG STX CCD cameras with 3" 24G UNS-2B female t...

Description Inverter ring with continuous M54 x 0,75 male thread Converts an M54 x 0.75 female thread into an M54 x 0.75 male thread Optical lengt...

Description Reducing piece: M68 external to M48external for direct connection of M48 accessories to the M68 system Changes the M68 (Zeiss) female ...

Description Baader-FlipMirror II Star Diagonal (BFM II) with three ports: Straight-through (S52, M48 and T-2 on both sides) for full-frame camera...