Products

Description Laser-Collimator for easy collimation of your telescope in 1-2 minutes High-quality, impact-resistant and highly accurate laser, with ...

Temporarily Unavailable Description LEONARDO BM-100 Bino Mount Ultra-stable precision parallelogram mount for heavy duty binoculars and spotting ...

Description Leveling-Weight Set developed for PlaneWave Direct-Drive mounts: for perfect balance in both axis Mounts directly to the standard scr...

Description The Losmandy compatible dovetail clamping plate 3? XL gives a very high level of stability and safety, especially for heavier and longe...

Description System M48- spacer (Fine-Adjustment) rings, available in thickness 0,3mm (black), 0,5mm (red), 1mm (gold) Very thin ring for finetunin...

Description M48 tilter for aligning your camera without tilt Compatible with the entire Baader M48 system 0-1° tilt range to correct misalignments...

Description Used to adjust the working distance of larger cameras and similar accessories with M54 thread Telescope side M54x0.75 female thread, 3...

Description System M54- spacer (Fine-Adjustment) rings, available in thickness 0.3mm (black), 0.5mm (red), 1mm (gold) Very thin ring for finetunin...

Description Changes a M54 male thread to a M54 female thread Width (optical length) = 7 mm Made of hardened, stainless steel Specifications MA...

Description M54 tilter for precisely aligning your camera Compatible with the Baader M54 system 0-1° tilt range to correct image field misalignmen...

Description Inverter ring with continuous M54 x 0,75 male thread Converts an M54 x 0.75 female thread into an M54 x 0.75 male thread Optical lengt...

Description System M68- spacer rings (Fine-Adjustment), available in thicknesses of 0.3mm (black), 0.5mm (red), 1mm (gold) Very thin rings used fo...

Description To change M68 internal into 2inch UNFi internal thread Telescope-side M68 external thread, eyepiece-sided 2" UNFI internal thread Lear...

Description Reducing piece: M68a to T-2a to change an M68 female into T-2 male thread combination of M68/2" UNFi changer ring (#2458232) and T-2/2...

Description This adapter enables compatibility between Baader's S65a connection and Zeiss M68 systems, providing a seamless link for various astron...

Description The FCCT can achieve micron tilt adjustment. To see how, read our guide: How to achieve micron tilt adjustment with the Baader FCCT, UF...

Description Baader M68ext x 1 to FLI adapter flange Telescope-sided with M68 (Zeiss) male thread, to connect all parts of the Baader/Zeiss M68 Sys...

Description Fifth edition of the former Carl Zeiss giant binocular with 30 mm prisms- our most elaborate binocular viewer With recalculated 7-laye...

Description The €œMaxi€-dovetail clamping plate XL is designed to accept 4€ 10Micron dovetail slide bars, suitable for heavier configurations. Ad...

Description Metal Magnet Ring for Homing Sensor of Steeldrive II. Fits Baader Diamond Steeltrack Focusers If you have upgraded your Diamong Steelt...

Description Secure grip! 25mm wide eyepiece clamp, for safely holding heavy cameras without any torsion. Much more stiff and rigid construction tha...

Description Adapter from Steeldrive II Controller Aux port to RCA type connector for common heating strips up to 10W. Enables precise temperature ...

Description Mobile Power Supply (DC converter) 12V input, 24V output (for GM1000 & GM2000) This Power Supply is a very high quality and reliabl...

Description The Morpheus Eyepiece Set includes all 6 Morpheus® eyepieces along with the Hyperion/Morpheus diecut foam eyepiece case (#2454601) and...

Description Mounting Block for counterweight-bar M14, ؘ 16mm for use on CDKs von Planewave Instruments Counterweight bar ( Shafts for leveling c...

Description Mounting-Head Protective Cover (Cordura) Suitable for GM 1000 HPS mount With zipper Can be laid over the mount for the protection

Description Network Cable (red) with ColdTemp-specified CAT-7 wire (CAT6a plug) Ideally suited for observatory installations. The special sheath o...

Description O-III Super-G filter with 9 nm FWHM and a maximum transmission of 97%.For visual and photographic observation of planetary nebulae and...

Description Off Axis Guider (BFM-OAG) for direct connection to the Baader FlipMirror II Star Diagonal (#2458055, ‚¬ 195,-) This is the only prism ...

Description RCC Off-Axis Guider is matched specifically for the RCC-I Coma Corrector and Digital SLR cameras. The guider's 36.5mm body length sets ...

Description Baader OPFA eyepiece holder for classic eyepiece projection with SLR and DSLR cameras Each OPFA is a complete accessory set for focal p...

Description Cleaning cloth "Optical Wonder™" made of Super-microfiber cleans without scratching: eyepieces, objective lenses – even mirrors Clean ...

Description PC Planetarium and Telescope control Software "Perseus" to control the mount with an external PC.

Description The PEGASUS wooden tripod by Geoptik is designed for the GM2000 mounts; provided with triangle accessory tray, bubble level and 10Micro...