Products

Description 27mm prisms with 26 / 25,5mm clear aperture, for all 1,25"-eyepieces – up to focal lengths of 35mm Ergonomically designed ClickLock® e...

Description Dustcap with M54 male thread Robust cap made of black anodized metal Dustproof closure for your accessories of the Baader M54 System ...

Description Dustcap with M54 female thread Robust cap made of black anodized metal Dustproof closure for your accessories of the Baader M54 System...

Description Dustcap with M68 x 1 female (internal) thread Robust cap made of black anodized metal Dustproof closure for your accessories of the Ba...

Description Dustcap with M68 x 1 male (external) thread Robust cap made of black anodized metal Dustproof closure for your accessories of the Baad...

Description Schott RG 830 substrate with super stack dielectric coating For pure methane band transmission, planetary imaging  Non-aging sealed co...

Description The Baader Modal Steel Pillar is a fully engineered permanent observatory solution for the large 10Micron mounts (GM3000, GM4000).  Its...

Description The Baader Modal Steel Pillar is a fully engineered permanent observatory solution for the small to medium 10Micron mounts (GM1000, GM2...

Description For Zeiss Quick Changer This T-2 dustcap is included in the scope of supply of the following products: 2" Glasspathcorrector® 1,7x fo...

Description Morpheus® Adapter to convert the Morpheus M43 external top-thread into a SP54 external thread – without adding to the optical height T...

Description The innovative Baader Vario Finder is capable of much more than a simple 'finderscope'. Baader started with a real telescope objective ...

Description Multipurpose Quick Release III (MQR III) 7x50 for all 50mm finderscopes with diameter of 62mm. Shipped with MQR IV guidescope rings, m...

Description Multipurpose Quick Release IV (MQR IV) 9x60 for all 60mm finderscopes with diameters of up 72mm. Shipped with MQR IV guidescope rings,...

Description Selective contrast filter, for all reflector and refractor telescopes Filters out specific wavelengths, especially those caused by str...

Description For reducing brightness and during Lunar and Solar observation. Suitable for solar observing only as an additional post-filter! Fine ...

Description 1¼" nosepiece with T-2 thread and M28.5 filterholder Barrel with 24mm Insertion and securing groove Focus side with T-2 external threa...

Description Additional optical spacer ring with 0.5mm thickness to achieve a perfect fine focus in case of focus problems Can be used for Baader F...

Description Made for outdoor use at cold temperatures Interchangeable EU/US/UK wall plug included Output 12.8V DC/ 1.5 Amp (19 Watt), large power ...

Description The Baader OTP Outdoor Telescope Power Supply was developed specifically for 10Micron telescope mountings.  It is the only power supply...

Description Clamps all 3" (Losmandy) and EQ- (Vixen/Celestron/Skywatcher) dovetails - minimum dovetail length 190mm It is equipped with all the kn...

Description Baader PAN-EQ clamp V370 dual clamp The PAN 3"/ EQ 370 offers a secure and absolutely firm clamping - for all standard mounting rails ...

Description Compact, mobile rotary stage for adjustment of 3" or 8" PAN EQ clamps on double mounting plates or mounts of the L-Mount series. Makes...

Description Quick mounting of optics with all EQ standard Celestron / Skywatcher / Vixen dovetail Massive but lightweight EQ-clamp, 190 mm (7.5") ...

Description To fit #2458196 Ultrashort 2" clamp onto Pentax OTA Pentax Adapter M84 / M68 Telescope side with Carl Zeiss M68 Pentax thread on ocula...

Description Special cable for the Baader OTP Outdoor Telescope Power Supply, 10meter in length.  Integrated Sense lead to regulate the power supply...

Description Special cable for the Baader OTP Outdoor Telescope Power Supply, 5meter in length.  Integrated Sense lead to regulate the power supply ...

Description High-quality Zenith Prism T-2/90 ° with 32mm Prism Rigid metal body Connection objective side: T-2 internal thread Connection eyepiece...

Description Ideal for Newton Focuser e.g. Baader Newton Crayford focusers with only 1mm optical path length Provides three separate mounting optio...

Description Baader Planetarium Q-Barlow 2.25x / 1.3x This high-quality 2.25x Barlow made of exotic glasses provides the rare extension factor of 2....

Description Eyepiece barrel reducer, 1¼ "to 0.965" (24.5mm) Threaded M28.5 for 1¼" filters For using 0.965" (24.5mm) eyepieces in 1¼ "eyepiece hol...

Description 2" external thread to 1 ¼" internal thread reducter / eyepiece adaptor Strong grip with 2 screws and non-marring bronze compression ri...

Description Reducing piece: M68a to M54a for direct connection of M54 accessories (e.g. QHY Color Filter Wheel (CFW 3) (various versions available...

Description Reducing piece: M68a to M62a for direct connection of M62 accessories (e.g. QHY Color Filter Wheel (CFW 3) (various versions available...

nd Description Low profile adapter 2"i to T-2a, featuring just 1.5mm optical length changes a 2" SC (50,8mm) male thread into a fixed T-2 (M42x0.7...

Description 3D Printed ring-wrench for Baader Clamping knobs (PAN-EQ clamps and Stronghold Tangent Mount).  Allows easy tightening and loosening of...