Mount Accessories

Description 1kg Leveling Weight made of V2A stainless steel Axis diameter 16mm Diameter 75 mm x 30 mm Suitable for Baader Shafts for leveling cou...

Description Mounting Block for counterweight-bar M14, Ø 16mm for use on CDKs von Planewave Instruments Counterweight bar ( Shafts for leveling co...

Description Leveling-Weight Set developed for PlaneWave Direct-Drive mounts: for perfect balance in both axis Mounts directly to the standard scr...

Description Needed to connect the Pan Adjuster for adjusting the optical axis of parallel mounted telescopes (#2451515) to the L-350 mount from Pl...

Description Compact, mobile rotary stage for adjustment of 3" or 8" PAN EQ clamps on double mounting plates or mounts of the L-Mount series. Makes...

Description The expert net control 2104 switching module is perfect for observatory installations, providing remote switching (power on/off) of all...

Description Balancing, 400mm long baseplate, fits onto #2451558 Baader-Sidewings. Allows the adaptation of Baader Guidescope rings (size I, II, and...

Description 8" (203mm) clamp width, for 10Micron GM 3000 or GM 4000. Suitable for 10Micron/Baader 8" dovetail bar #1454540 as well as for Planewave...

Description Baader-Sidewings mount onto the sides (left & right) of the 8" Planewave Clamp #CDK-CLAMP. Sidewings allow the adaptation of balanc...

Description Baader Double Mounting Plate.  8" width (203mm) heavy-duty dovetail bar 570mm in total length, for up to 100kg (220lbs).  Mounts onto h...

Description The Baader OTP Outdoor Telescope Power Supply was developed specifically for 10Micron telescope mountings.  It is the only power supply...

Description The Baader ColdTemp Network Cable is specifically made for observatory installations.  The special sheath of these cables remains elast...

Description The Baader ColdTemp Network Cable is specifically made for observatory installations.  The special sheath of these cables remains elast...

Description Special cable for the Baader OTP Outdoor Telescope Power Supply, 10meter in length.  Integrated Sense lead to regulate the power supply...

Description Special cable for the Baader OTP Outdoor Telescope Power Supply, 5meter in length.  Integrated Sense lead to regulate the power supply ...

Description The Baader Modal Steel Pillar is a fully engineered permanent observatory solution for the large 10Micron mounts (GM3000, GM4000).  Its...

Description The Baader Modal Steel Pillar is a fully engineered permanent observatory solution for the small to medium 10Micron mounts (GM1000, GM2...

Description The Baader Steel Leveling Flange is used to  precisely level and adjust north on the Baader Modal Steel Pillars.  The open design permi...

Description The Baader Steel Leveling Flange is used to  precisely level and adjust north on the Baader Modal Steel Pillars.  The open design permi...

Description The Baader Steel Leveling Flange is used to  precisely level and adjust north on the Baader Modal Steel Pillars.  The open design permi...

Description The Baader Steel Leveling Flange is used to  precisely level and adjust north on the Baader Modal Steel Pillars.  The open design permi...

Description 3D Printed ring-wrench for Baader Clamping knobs (PAN-EQ clamps and Stronghold Tangent Mount).  Allows easy tightening and loosening of...

Description Clamps all 3" (Losmandy) and EQ- (Vixen/Celestron/Skywatcher) dovetails - minimum dovetail length 190mm It is equipped with all the kn...

Description Baader PAN-EQ clamp V370 dual clamp The PAN 3"/ EQ 370 offers a secure and absolutely firm clamping - for all standard mounting rails ...

Description Quick mounting of optics with all EQ standard Celestron / Skywatcher / Vixen dovetail Massive but lightweight EQ-clamp, 190 mm (7.5") ...

Description 10/17 - Revised Version: with significantly more mounting options than the predecessor plate, which could only hold our guidescope ri...

Description Network Cable (red) with ColdTemp-specified CAT-7 wire (CAT6a plug) Ideally suited for observatory installations. The special sheath o...

Description Made of V2A stainless steel With 1¼" thread(male/female) – to mount on top of Dovetail Clamp V or 3" Rider clamp (several weights may ...

Description Made of V2A stainless steel Including 3" riderclamp / 60mm long to mount onto 3" dovetails (Losmandy style) 1 kg Specifications MA...

Description Made of V2A stainless steel Including V-clamp 70mm diam. to mount onto V-dovetails (Vixen standard) 1 kg Specifications MANUFACTUR...