Description

Become an instant astronomer, even if you’ve never used a telescope before, with the one-of-a-kind StarSense AutoAlign. Just set up the accessory, push the Align button on the hand control, and StarSense begins capturing and comparing images of the night sky against its internal database. In about three minutes, its gathered enough information to triangulate its position and align itself. Then, press the Sky Tour button: StarSense will automatically slew to all the best stars, planets, galaxies, and more currently visible in the night sky.

How it Works

The self-alignment technology behind our award-winning SkyProdigy series is now available for most Celestrons current computerized telescopes and compatible with many older models as well. (See compatibility list below.)

A small digital camera takes the place of your finderscope and attaches using one of two provided mounting brackets. The included StarSense hand control, with a database of over 40,000 celestial objects, takes the place of your NexStar hand control. The camera automatically captures a series of images of the sky. StarSense identifies the stars in the images, matching them to its database. Once a positive match is confirmed, StarSense calculates the coordinates of the center of the captured image, thereby determining exactly where the telescope is pointed.

Before StarSense, using a computerized telescope required a lengthy alignment process of finding and centering at least two bright stars in the telescope’s eyepiece. But StarSense automatically aligns itself with minimal user input. Just enter your time, date, and location and let StarSense do the rest!

Advanced Mount Modeling

Even the most advanced telescope users will love using StarSense AutoAlign. This affordable accessory replaces the expensive software usually used for advanced mount modeling.

With built-in mount modeling, youll get superior pointing accuracy from horizon to horizon. When your alignment needs to be perfect, add up to 10 additional calibration stars to achieve a new level of accuracy, great for locating objects in the camera’s field of view for astroimaging.

StarSense camera field of view: 6.88º x 5.16º

StarSense Compatibility List

Any mount with 5.x or greater is compatible with the software

Compatible
Advanced VX	CGX-L
Astro Fi	CPC, CPC DX
CG-5 (with CG-5 Aux. splitter)	NexStar Evolution
CGE	NexStar GT (2015 models and newer with Aux. splitter)
CGE Pro	NexStar SE Series
CGEM II	NexStar SLT
CGEM, CGEM DX	SkyProdigy
CGX

Not Compatible
NexStar i Series	NexStar GPS
Ultima 2000	Early generation GoTo mounts (such as Compustar)
LCM series

Specifications

CAMERA INFORMATION:
Imaging Sensor:	Aptina MT9M034 1 .2 Megapixel CMOS
Pixel Array:	1280 x 960
Pixel Size:	3 .75μm x 3 .75μm
Objective Lens Diameter:	20mm (2-element)
Objective Lens Focal Length:	40mm
Objective Lens Focal Ratio/F-stop:	f/2
Control Board:	32-bit processor with embedded Linux Operating System
USB Port:	USB 2 .0
Auxiliary Port:	Connects to Celestron telescopes
HAND CONTROLLER INFORMATION:
Object Database:	45,178
LCD:	Red backlit 4 Line LCD
CPU:	STMicro ARM 32-bit Cortex™-M3 CPU
Software and Firmware:	Fully upgradable
RS-232 Port:	PC connectable for software/firmware upgrades

Downloads

StarSense AutoAlign Manual

Celestron Firmware Manager (CFM) Software

Mount Accessories

Filters

StarSense AutoAlign

Success

Error