New Products
Filters
Guidescope rings BP IV - for tube diameters from 175-265mm (2pc), with large knobs and ball bearing tips
Baader PlanetariumDescription Guidescope rings BP IV (2 pc) For tube diameter 175 - 265 mm Massive, solid, turned aluminium rings Width 28 mm Support surface with ...
View full detailsAdapter D60 (Pentax) to 2" Nosepiece
Baader PlanetariumDescription With 2" bronze pressure ring and 30.5mm length, 60mm outer diameter This reducer fits onto every 2" barrel and gets clamped with two M...
View full detailsAdapter M54 internal to T- external
Baader PlanetariumOverview Reducing Adapter M54i to T-2a (M42 x 0.75) with M54 female thread Changes the M54 male thread of telescope into an T-2 male thread Can be...
View full detailsBaader M54 Heavy Duty QuickChanging System (consisting of parts #2958760 & #2958765), optical length 15mm
Baader PlanetariumDescription Heavy Duty M54 Quick Changing System enables lightning-fast changes between cameras, filter wheels or ClickLock eyepiece clamps Optica...
View full detailsBaader M54 Quick Change Ring with optical length 4mm
Baader PlanetariumDescription M54 male threaded quick coupler with S54 mm dovetail Creates a quick change and rotating device with heavy load capacity when coupled ...
View full detailsBaader M54 Heavy Duty QuickChanger with Optical length 11mm
Baader PlanetariumDescription M54 female thread Heavy Duty Quick Changer Creates with the M54a Change Ring with S54a ring dovetail (#2958765) a quick-change and rot...
View full detailsAdapter M48 internal to T-2 external
Baader PlanetariumDescription Adapter M48i to T-2a Reducing Ring M48 to T-2 with M48 female thread Changes the M48 male thread of a telescope into a T-2 male thread...
View full detailsHarpia Bayonet 1.25" Ocular Adapter (to fit normal 1.25" eyepieces onto Zeiss Harpia Spotting Scopes)
Baader PlanetariumDescription Designed for seamless integration with Zeiss Harpia spotting scopes Enables the use of 1.25" astronomical eyepieces Facilitates astrop...
View full detailsBaader Adapter S58 to M54a- for all BDS Diamond Steeltrack
Baader PlanetariumDescription BDS-Adapter with M54 outer thread to connect M54 parts replaces the standard clamp, is installed with the S58 dovetail ring Suitable f...
View full detailsBaader SunDancer II Telecentric System TZ-4S
Solar SpectrumDescription Baader SunDancer II 4x Telecentric System TZ-4S Delivers a plane-parallel, achromatic beam of light with 36 mm diameter Designed espe...
View full detailsBaader C2 Swan-Band Filter (15nm)- OIII Parallel
Baader PlanetariumDescription Comet filter for the two brightest C2 emission lines at 511 and 514nm (called "Swan-Band") in the gas tail and gasplume of comets, res...
View full detailsBaader 2" Nosepiece to M54 external with Safety-Kerf
Baader PlanetariumDescription Nosepiece 2" to M54a, ultra-hard with Safety-Kerfs Focus-sided M54 male thread Telescope-sided 2" barrel with 2" filter thread (M48) I...
View full detailsM54 internal Inverter ring (converts external to internal)
Baader PlanetariumDescription Changes a M54 male thread to a M54 female thread Width (optical length) = 7 mm Made of hardened, stainless steel Specifications MA...
View full detailsAdapter M54 external to M48 internal
Baader PlanetariumDescription Reducing Adapter M54 to M48 with M54 male thread Changes the M54 female thread of an adapter into an M48 female thread Can be used to ...
View full detailsAdapter M54 internal to M48 external
Baader PlanetariumDescription Reducing Adapter M54 to M48 with M54 female thread Changes the M54 male thread of an adapter into an M48 male thread Can be used to co...
View full detailsM54 Extension Tubes
Baader PlanetariumDescription Used to adjust the working distance of larger cameras and similar accessories with M54 thread Telescope side M54x0.75 female thread, 3...
View full detailsBaader M54 Metal Dustcap with S54a dovetail
Baader PlanetariumDescription M54 dustcap with S54a ring dovetail Robust cap made of black anodized metal Dustproof closure for the M54 Quick Change System Specifi...
View full detailsBaader Metal Dustcap with M54 external thread
Baader PlanetariumDescription Dustcap with M54 male thread Robust cap made of black anodized metal Dustproof closure for your accessories of the Baader M54 System ...
View full detailsBaader Metal Dustcap with M54 internal thread
Baader PlanetariumDescription Dustcap with M54 female thread Robust cap made of black anodized metal Dustproof closure for your accessories of the Baader M54 System...
View full detailsBaader 2" Filter Crown Tool
Baader PlanetariumDescription Tool for tension-free mounting and dismounting of hard-to-reach 2" Baader filters with milled grip crown. Suitable for all mounted Baa...
View full detailsBaader 2" BDS Steeltrack® M68i Adapter
Baader PlanetariumDescription Baader Diamond Steeltrack Adapter with M68 female thread to connect M68 accessories according to Zeiss standard Special steel version ...
View full detailsBaader UFC Seal, 3D-printed
Baader PlanetariumDescription Suitable for all UFC systems Suitable for all UFC systems - closes the opening for the filter sliding of the UFC against dust and ligh...
View full detailsBaader UFC Dark Slider, 3D-printed
Baader PlanetariumDescription Suitable for all UFC systems Closes the aperture of UFC and telescopes at the same time to create darks with CMOS Cameras Vignettes th...
View full detailsBaader 4x Filterholder 36mm for FCCT (3D-printed) for unmounted Ø 36x2mm Baader Filter
Baader PlanetariumDescription Set consisting of four pieces 3D-printed filter holder for unmounted Ø36 x 2 mm Baader filters Fitting for Baader FCCT I for RASA 8"- ...
View full detailsBaader 4x Filterholder 31mm for FCCT (3D-printed) for unmounted Ø31x2mm Baader Filter
Baader PlanetariumDescription Set consisting of four pieces 3D-printed filter holder for unmounted Ø 31 x 2 mm Baader filters Fitting for Baader FCCT I for RASA 8"...
View full detailsBaader 4x Filterholder 2" for FCCT (3D-printed) for unmounted Ø47.4mm Baader Filter
Baader PlanetariumDescription Set consisting of four pieces 3D-printed filter holder for unmounted 2" (Ø 47.4 mm) Baader filters Fitting for Baader FCCT I for RASA...
View full detailsBaader 36mm Filterholder for Baader FCCT (3D-printed) for unmounted Ø36x2mm Baader Filter
Baader PlanetariumDescription 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters Fitting for Baader FCCT I for RASA 8"- suitable for Ø77 mm QHY-Came...
View full detailsBaader 31mm Filterholder for Baader FCCT (3D-printed) for unmounted Ø31x2mm Baader Filter
Baader PlanetariumDescription 3D-printed filter holder for unmounted Ø 31 x 2 mm Baader filters Fitting for Baader FCCT I for RASA 8"- suitable for Ø77 mm QHY-Came...
View full detailsBaader 2" Filterholder for Baader FCCT (3D-printed) for unmounted Ø47.4mm Baader Filter
Baader PlanetariumDescription 3D-printed filter holder for unmounted 2" (Ø 47.4 mm) Baader filters Fitting for Baader FCCT I for RASA 8"- suitable for Ø77 mm QHY-C...
View full detailsBaader SLOAN/SDSS Filters- Photometric
Baader PlanetariumDescription Baader SLOAN-ugriz' Bandpass Filter Set, suitable from f/15 to f/1.8 SLOAN/SDSS (ugriz) photometric filters with transmission accord...
View full detailsBaader UBVRI Bessel Filters- Photometric
Baader PlanetariumDescription The filters worked exceptionally well and we got terrific images post-impact. We couldnt have done it without your help, and we are...
View full detailsMark V GroØfeld (Giant) Binocular Viewer
Baader PlanetariumDescription Fifth edition of the former Carl Zeiss giant binocular with 30 mm prisms- our most elaborate binocular viewer With recalculated 7-laye...
View full detailsUniversal Alan Gee II- Telecompressor (UAG II)
Baader PlanetariumDescription Schmidt-Cassegrain telecompressor/reducer and flatfield-corrector For Schmidt-Cassegrain-telescopes with 2" eyepiece clamp or for dire...
View full detailsReducer M68 external to M48 external
Baader PlanetariumDescription Reducing piece: M68 external to M48external for direct connection of M48 accessories to the M68 system Changes the M68 (Zeiss) female ...
View full detailsBaader FlipMirror II Star Diagonal
Baader PlanetariumDescription Baader-FlipMirror II Star Diagonal (BFM II) with three ports: Straight-through (S52, M48 and T-2 on both sides) for full-frame camera...
View full detailsBaader MaxBright® II Binoviewer with Case
Baader PlanetariumDescription 27mm prisms with 26 / 25,5mm clear aperture, for all 1,25"-eyepieces- up to focal lengths of 35mm Ergonomically designed ClickLock® ey...
View full details